If you’d like an easy way to pass CCNA 200-301 Exam, you can consider our, which takes the leading position in providing the best valid and high-pass rate 200-301 exam preparation. If you are still thinking about how to pass, let our Real CCNA 200-301 test dumps help you.

Our 200-301 exam dumps help thousands of candidates pass the exam in the 1st try over 8 years. If you want to get rid of failing the exam, please follow us, then everything will be easy. CCNA 200-301 exam practice tests provided by our cover all the questions you will face in the real exam.

Try the demo below to test yourself!

Question 1
You are configuring all your devices for IPv6. Which of the following is the only device that requires the ipv6 unicast-routing command?
A. Layer 2 switch
B. Router
C. Adaptive security appliance
D. Wireless AP
Correct Answer: B

Question 2
Which of the following statements are NOT part of the guidelines for configuring the VLAN Trunking Protocol (VTP) to ensure that VLAN information is distributed to all Cisco switches in the network? (Choose all that apply.)

A. The VTP version must be the same on all switches in a VTP domain.
B. The configuration revision number must be configured identically on all switches in a VTP domain.
C. The VTP password must be the same on all switches in a VTP domain.
D. The VTP domain name must be the same on all switches in a VTP domain.
E. VLANs configured on clients should exist on the server switch.
F. The switch(s) that will share VLAN information is(are) operating in VTP server mode
G. The switches must be configured to use the same method of VLAN tagging
H. The switches must be connected with trunk links
Correct Answer: BE

QUESTION 3
Which command is used on the Cisco Catalyst 2950 series switch to configure a port as a VLAN trunk port?
A. switchport mode trunk
B. set trunk on
C. switchport trunk on
D. trunk mode on
Correct Answer: A

Question 4
You need to set the Telnet password to “john” on a Cisco router. Which set of commands would you use?
A. Router(config)#line vty 0 4
Router(config-line)#login
Router(config-line)#password john
B. Router(config)#line con 0
Router(config-line)#login
Router(config-line)#password john
C. Router(config)#line vty 0 4
Router(config-line)#login
Router(config-line)#enable secret john
D. Router(config)#line con 0
Router(config-line)#login
Router(config-line)#enable password john
Correct Answer: A

Cisco-CCNA-200-301-Dumps

Question 5
What is the significance of the 1 in the following configuration?
router(config)# router eigrp 1
A. It is the process ID for EIGRP and is locally significant to this router.
B. It is the process ID for EIGRP and must be the same on all EIGRP routers.
C. It is the AS number for EIGRP and is locally significant to this router.
D. It is the AS number for EIGRP and must be the same on all EIGRP routers.
Correct Answer: D

Question 6
Which protocol is responsible for negotiating and maintaining Point-to-Point Protocol (PPP) connections?
A. LCP
B. NCP
C. BRI
D. ISDN
Correct Answer: A

Question 7
You are the network administrator for your company. You wanted to connect the host computers to the switches.
Which cable should you use to ensure the connectivity?
A. Straight-through cable
B. Rollover cable
C. Crossover cable
D. Serial cable
Correct Answer: A

Question 8
You have added a new router to your network using all of the default settings. You can connect to everything by IP address, but the router doesn’t seem to be resolving names to IP addresses. The DNS server is in a directly connected network.
Which of the following is most likely the problem?
A. You configured an incorrect IP address for the DNS server
B. You configured an incorrect default gateway on the router
C. You failed to execute the IP domain lookup command
D. You failed to create an IP helper-address
Correct Answer: A

Question 9
Which Network Address Translation (NAT) term is used for the IP address assigned to a host on the inside network?
A. Inside local address
B. Inside global address
C. Outside local address
D. Outside global address
Correct Answer: A

Question 10
Which of the following splits the network into separate broadcast domains?
A. bridges
B. VLANs
C. switches
D. hubs
Correct Answer: B

Why our

◆ Valid real test dumps Based on 200-301 Real Test
◆ Free demo download before purchasing
◆ Regularly Updated 200-301 exam dumps
◆ Easy-to-read & Easy-to-handle Layout
◆ Well Prepared by Our Professional Experts
◆ 100% real exam environment
◆ 24 Hour Online Support Available, VIP customer service
◆ Service Extension in case of failure
◆ Money & Information guaranteed

Acquiring the certification isn’t going to be an easy task, but if you have the expertise help of the Cisco CCNA 200-301 Dumps offered at the EveDumps, you would be able to achieve it in a single attempt.

Comments

Leave a comment